infercallChoosing a country moves to that country's site.Log inGet United Kingdom mobile call divert instructions. Choose your provider and destination number below.
Before you change anything: check and record the current destination for each selected condition. Confirm plan restrictions and charges, and select the correct SIM.
The activation codes below use an example number. Enter your own valid domestic destination above; copying activation or downloading this setup stays disabled until then.
Reference code coverage: Unanswered + Busy + Phone off or no signal.
Enter each distinct command manually in your dial pad, then press Call/Send and wait for carrier confirmation. This page never dials a code.
Unanswered
**61*+447700900123*10*20#Busy
**67*+447700900123#Phone off or no signal
**62*+447700900123#Your phone rings for about 20 seconds before the call forwards.
Turn off only the conditions shown here. This stops that forwarding; it does not necessarily restore your previous voicemail or other destination.
Unanswered
##61#Busy
##67#Phone off or no signal
##62#Stopping forwarding is not necessarily restoring the previous voicemail or other destination. Restore recorded destinations separately using your provider's instructions, then test.
Unanswered
*#61# Busy
*#67# Phone off or no signal
*#62# After setting up forwarding, call your business number from another phone to check that calls reach your receptionist when you expect. After turning forwarding off, check that calls ring through normally again.
Every code here is from Vodafone UK's own support page.
Sources: Vodafone UK support.
This download contains your destination number. Keep it on your own device; the shared QR/link never includes it.
Choose your provider and destination above, then keep these two steps handy. This routine uses all-call forwarding, independently of the individual code mode selected above. You make each switch yourself.
Settings → Apps → Phone → Call Forwarding. Choose the correct SIM/line. Turn on, enter the Forward To number and tap Back. Return here to turn off. Cellular coverage and carrier support are required.
Before starting, note any existing all-calls destination. Turning forwarding off does not restore that old route. Keep your separate busy, unanswered and unreachable settings; don’t use “cancel all”. Check your plan restrictions and forwarding charges.
Enter your own valid destination above to prepare and save the routine. No example number will be saved.
Turn on All calls / Always forward to your Infercall number.
Use the provider/device instructions to turn off that same all-calls setting, or leave Infercall answering. This stops that route; restore any previous destination separately if needed. Do not use a broad reset to preserve other diverts.
Save only on your own device. “Save on this browser” stores the provider, destination and device choice locally until you clear it or browser data is removed. A Home Screen shortcut opens the tool, not a carrier command. Use “Load saved routine” here when you return.
iPhone: in Safari, Share → Add to Home Screen → Add. Android: in Chrome’s menu, use the website shortcut / Add to Home screen option (wording varies). You can bookmark this page instead.
iPhone blocks forwarding-code links. Saved contact/speed-dial support for these service codes has not been verified; we don’t offer an installable one-tap dial shortcut. Copy or download the instructions, then use the provider’s manual route.
Sources: Vodafone (UK) forwarding; Apple forwarding; Samsung settings; Safari Home Screen; Chrome shortcuts.
Want missed calls answered? Forward them to Infercall. It picks up 24/7, answers questions and books the work in.
Start with your websiteA call comes in to your mobile. What happens next depends on which forwarding you've turned on:
You still answer when you can. Ring time is set in seconds, roughly 5 seconds per ring, so 20 seconds is about 4 rings.
Only calls that arrive while you're on the phone (and on many phones, calls you decline).
Covers a flat battery, flight mode or no coverage.
For after hours, holidays or when you can't take calls at all. If it's on, it overrides the other three.
Types 1 to 3 are called conditional forwarding. Your provider may support only some of them, combine conditions in one command or require app settings. Follow the selected setup and its matching undo. A broad reset can remove voicemail routes too; restore previous destinations separately.
Recommended setup for a business: forward when you don't answer, when you're busy and when your phone is off, where your provider supports those conditions, all to your answering number. With no-answer forwarding, your phone rings first, so you pick up the calls you can, and the rest are still answered.
Replace NUMBER with the number you want calls to go to.
Every code here is from Vodafone UK's own support page. Replace NUMBER with the destination in +44 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER*10*20# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | *#62# |
| All calls | **21*NUMBER# | ##21# | *#21# |
Cancel every divert: ##002#. Confirmed by the network. Source: Vodafone UK support.
Standard UK network codes. EE doesn't publish them, but they're the codes its network uses, and EE customers confirm them on the EE Community forum. Replace NUMBER with the destination in +44 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER**20# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | *#62# |
| All calls | **21*NUMBER# | ##21# | *#21# |
Cancel every divert: ##002#. Standard code, not published by the network. Source: EE Community (ring time codes tested by EE customers).
O2's own guides publish the turn-on codes. The turn-off and check codes are the standard UK network codes from O2's Community guide; O2 doesn't list them on its help pages. Replace NUMBER with the destination in +44 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER*11*20# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | *#62# |
| All calls | **21*NUMBER# | ##21# | *#21# |
Cancel every divert: ##002#. Partly confirmed by the network. Source: O2 device guide (turn-on codes).
Standard UK network codes. Three doesn't publish them. Three customers report them working on the Three Community forum, but some say diverts to another number stopped working for them, so test yours after dialling. Replace NUMBER with the destination in +44 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | *#62# |
| All calls | **21*NUMBER# | ##21# | *#21# |
Cancel every divert: ##002#. Standard code, not published by the network. Source: Three Community (codes tested by Three customers).
Find your brand below. Where a reseller hasn't published its own codes, we show the host network's codes and label them. Plan restrictions and charges can differ: expand your provider for its full table, notes and sources, or use the generator with your number.
| Provider | Network | Unanswered calls | Turn off |
|---|---|---|---|
| giffgaff call forwarding codes | O2 | **61*NUMBER*11*20# | ##61# |
| Tesco Mobile call forwarding codes | O2 | **61*NUMBER*11*20# | ##61# |
| Sky Mobile call forwarding codes | O2 | **61*NUMBER*11*20# | ##61# |
| VOXI call forwarding codes | Vodafone (UK) | **61*NUMBER*10*20# | ##61# |
| Lebara (UK) call forwarding codes | Vodafone (UK) | **61*NUMBER*10*20# | ##61# |
| iD Mobile call forwarding codes | Three | **61*NUMBER# | ##61# |
| SMARTY call forwarding codes | Three | **61*NUMBER# | ##61# |
| Lyca Mobile (UK) call forwarding codes | EE | **61*NUMBER**20# | ##61# |
giffgaff runs on O2's network, so these are O2's codes. giffgaff doesn't publish its own. O2's own guides publish the turn-on codes. The turn-off and check codes are the standard UK network codes from O2's Community guide; O2 doesn't list them on its help pages. Replace NUMBER with the destination in +44 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER*11*20# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | *#62# |
| All calls | **21*NUMBER# | ##21# | *#21# |
Unanswered calls: you choose 5 to 30 seconds in the code (about 1 ring to about 6 rings).
Source: O2 codes (O2 device guide (turn-on codes)); giffgaff runs on O2.
Tesco Mobile runs on O2's network, so these are O2's codes. Tesco Mobile doesn't publish its own. O2's own guides publish the turn-on codes. The turn-off and check codes are the standard UK network codes from O2's Community guide; O2 doesn't list them on its help pages. Replace NUMBER with the destination in +44 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER*11*20# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | *#62# |
| All calls | **21*NUMBER# | ##21# | *#21# |
Unanswered calls: you choose 5 to 30 seconds in the code (about 1 ring to about 6 rings).
Source: O2 codes (O2 device guide (turn-on codes)); Tesco Mobile runs on O2.
Sky Mobile runs on O2's network, so these are O2's codes. Sky Mobile doesn't publish its own. O2's own guides publish the turn-on codes. The turn-off and check codes are the standard UK network codes from O2's Community guide; O2 doesn't list them on its help pages. Replace NUMBER with the destination in +44 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER*11*20# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | *#62# |
| All calls | **21*NUMBER# | ##21# | *#21# |
Unanswered calls: you choose 5 to 30 seconds in the code (about 1 ring to about 6 rings).
Source: O2 codes (O2 device guide (turn-on codes)); Sky Mobile runs on O2.
VOXI runs on Vodafone (UK)'s network, so these are Vodafone (UK)'s codes. VOXI doesn't publish its own. Replace NUMBER with the destination in +44 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER*10*20# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | *#62# |
| All calls | **21*NUMBER# | ##21# | *#21# |
Unanswered calls: you choose 5 to 30 seconds in the code (about 1 ring to about 6 rings).
Source: Vodafone (UK) codes (Vodafone UK support); VOXI runs on Vodafone (UK).
Lebara (UK) runs on Vodafone (UK)'s network, so these are Vodafone (UK)'s codes. Lebara (UK) doesn't publish its own. Replace NUMBER with the destination in +44 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER*10*20# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | *#62# |
| All calls | **21*NUMBER# | ##21# | *#21# |
Unanswered calls: you choose 5 to 30 seconds in the code (about 1 ring to about 6 rings).
Source: Vodafone (UK) codes (Vodafone UK support); Lebara (UK) runs on Vodafone (UK).
iD Mobile runs on Three's network, so these are Three's codes. iD Mobile doesn't publish its own. Standard UK network codes. Three doesn't publish them. Three customers report them working on the Three Community forum, but some say diverts to another number stopped working for them, so test yours after dialling. Replace NUMBER with the destination in +44 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | *#62# |
| All calls | **21*NUMBER# | ##21# | *#21# |
Unanswered calls: Three doesn't publish a ring time for unanswered calls, and customers report it varies, so this code doesn't set one.
Source: Three codes (Three Community (codes tested by Three customers)); iD Mobile runs on Three.
SMARTY runs on Three's network, so these are Three's codes. SMARTY doesn't publish its own. Standard UK network codes. Three doesn't publish them. Three customers report them working on the Three Community forum, but some say diverts to another number stopped working for them, so test yours after dialling. Replace NUMBER with the destination in +44 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | *#62# |
| All calls | **21*NUMBER# | ##21# | *#21# |
Unanswered calls: Three doesn't publish a ring time for unanswered calls, and customers report it varies, so this code doesn't set one.
Source: Three codes (Three Community (codes tested by Three customers)); SMARTY runs on Three.
Lyca Mobile (UK) runs on EE's network, so these are EE's codes. Lyca Mobile (UK) doesn't publish its own. Standard UK network codes. EE doesn't publish them, but they're the codes its network uses, and EE customers confirm them on the EE Community forum. Replace NUMBER with the destination in +44 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER**20# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | *#62# |
| All calls | **21*NUMBER# | ##21# | *#21# |
Unanswered calls: you choose 5 to 30 seconds in the code (about 1 ring to about 6 rings).
Source: EE codes (EE Community (ring time codes tested by EE customers)); Lyca Mobile (UK) runs on EE.
Networks checked October 2026 against each provider's own coverage page or plan summary for the selected country. Providers can change networks, so check yours if a code doesn't work.
Using a business phone system or VoIP line? See our call forwarding guide for other providers.
Use the Turn off steps for your selected provider and the conditions you enabled. There is no universal cancellation code. A broad reset can also remove forwarding to voicemail. Restore any previous destinations separately, then test from another phone.
Every code here is from Vodafone UK's own support page. Choose Vodafone (UK) in the provider selector for its activation, turn-off and status instructions. See its ring-time options and plan restrictions alongside the setup.
Standard UK network codes. EE doesn't publish them, but they're the codes its network uses, and EE customers confirm them on the EE Community forum. Choose EE in the provider selector for its activation, turn-off and status instructions. See its ring-time options and plan restrictions alongside the setup.
O2's own guides publish the turn-on codes. The turn-off and check codes are the standard UK network codes from O2's Community guide; O2 doesn't list them on its help pages. Choose O2 in the provider selector for its activation, turn-off and status instructions. See its ring-time options and plan restrictions alongside the setup.
Standard UK network codes. Three doesn't publish them. Three customers report them working on the Three Community forum, but some say diverts to another number stopped working for them, so test yours after dialling. Choose Three in the provider selector for its activation, turn-off and status instructions. Three doesn't publish a ring time for unanswered calls, and customers report it varies, so this code doesn't set one.
Ring time depends on your provider. Where it supports an adjustable time, choose the seconds in the tool. Otherwise follow the provider’s fixed ring-time note. One ring is roughly five seconds; test the result from another phone.
Conditional forwarding covers supported unanswered, busy or unreachable calls. All-call forwarding sends every call straight to the destination without ringing your phone. If all-call forwarding is on, it takes priority.
Choose your provider, then open the individual forwarding conditions. Some providers combine busy and unanswered calls or require phone settings instead of a code. The selected setup shows the conditions actually covered.
Choose your United Kingdom mobile provider above to see its codes or app instructions, plan restrictions and charges. If it is not listed, check your provider’s current support instructions. Choose your mobile provider
You choose. Use “Let me answer first” for the supported busy, unanswered and unreachable conditions, or choose all calls when you want every call to go to your receptionist. Check the coverage shown for your provider.
It depends on your provider and plan. Read the charges and eligibility notes beside your selected setup and follow its linked sources to confirm your current plan, especially when roaming. A reseller’s rules can differ from its host network.
Yes. Use your Infercall number as the destination for your provider’s supported forwarding options. Test that calls reach your receptionist when you expect.
